Bonart ART-M3 Magnetostrictive ART-M3II Ultrasonic Scaler 25KHZ
- Product code: F2M097
BonART Marquee: Bonart M3II Magnetostrictive Ultrasonic Scaler in 25K.
This tabletop Magnetostrictive is a robust, user friendly scaler with 3 modes for General Scaling, Perio, and Endo.
With adjustable power and water control, and clear LCD display.
Locks in the frequency of each individual tip for optimal performance via Auto gain technology.
- 12 Months Warranty
- CE and ISO certified.
- 3 Modes: General, Endo, & Perio.
- Direct water feed required.
Matching BonART Inserts available – Unit also follows a universal standard and should accept most compatible brands such as Cavitron.
Available in either 25K or 30K models.
(25K and 30K inserts cannot be mixed-and-matched between units. Please only use 30K inserts with the 30K unit, and vice versa. Attempting to use the wrong frequency insert will result in no function, and could potentially damage the handpiece of the unit.
Note that there is no efficacy or “power” difference between 25K or 30K inserts. 30K inserts have a shorter stack and less metal, thus they require a 5 kilohertz increase within the unit to oscillate properly. The higher number does not indicate any increase in quality or efficacy.)
-Bonartmed (Bonart Co Ltd)
Bonart ART-M3 Magnetostrictive ART-M3II Ultrasonic Scaler 25KHZ
- Product code: F2M097
BonART Marquee: Bonart M3II Magnetostrictive Ultrasonic Scaler in 25K.
This tabletop Magnetostrictive is a robust, user friendly scaler with 3 modes for General Scaling, Perio, and Endo.
With adjustable power and water control, and clear LCD display.
Locks in the frequency of each individual tip for optimal performance via Auto gain technology.
- 12 Months Warranty
- CE and ISO certified.
- 3 Modes: General, Endo, & Perio.
- Direct water feed required.
Matching BonART Inserts available – Unit also follows a universal standard and should accept most compatible brands such as Cavitron.
Available in either 25K or 30K models.
(25K and 30K inserts cannot be mixed-and-matched between units. Please only use 30K inserts with the 30K unit, and vice versa. Attempting to use the wrong frequency insert will result in no function, and could potentially damage the handpiece of the unit.
Note that there is no efficacy or “power” difference between 25K or 30K inserts. 30K inserts have a shorter stack and less metal, thus they require a 5 kilohertz increase within the unit to oscillate properly. The higher number does not indicate any increase in quality or efficacy.)
-Bonartmed (Bonart Co Ltd)
Operating frequency:
25khz Model: 24.5khz ± 5%
30khz Model: 27.9Khz ± 5%
- Maximum water flow rate: approximately 100 ml/min
- Dimensions (cm): 26(L) x 20(W) x 7(H)
- Hand piece cable length: 250 cm
- Foot switch cable length: 250 cm
- Weight: 3.5 kg
In order to prevent hard water build-up, it’s recommended that you install an inline water filter. Only purified / treated water must be used with the scaler.
James Tiernan (verified owner) –
Even post Brexit purchasing with F2 Medical from Ireland was seamless.
Philip Lewis (verified owner) –
Bought this recently as a back-up unit. Found it is so easy to adjust and works so well that I have actually replaced the original with it. Looking forward to assessing its longer term performance. If satisfactory would definitely buy again.